Do You Need To Change Rotors With Brake Pads

Some machine parts are replaced in pairs. For example, water pumps and timing belts are typically replaced together. What about brake pads and rotors, though? Do you need to buy new rotors whenever you have your brake pads replaced, or vice versa?

It is recommended, but it's non necessary. It depends on two factors:

ane. The Condition Of Both Parts

Rotor pad replace

Paradigm Credit: NutzAboutBolts

Permit's say you need to replace your brake pads. Are your rotors nearing the terminate of their life, or are they notwithstanding in good condition? Information technology's upwardly to you if you want to kill two birds with one stone and replace your rotors along with your restriction pads. This way, you don't take to keep an centre on your sometime rotors and then go through the problem of replacing them when information technology'southward time.

Typically, you would need to supervene upon your restriction pads a couple of times before you need new rotors. Aggressive driving and braking, however, may require the rotors to be replaced forth with your brake pads every time.

The best way to make up one's mind the status of your rotors and brake pads is to examine all of them at the same time. If you cheque your rotors, for example, it'southward worth the extra few minutes to check your brake pads, as well.

Even if your rotors all the same have a lot of life left in them, it'due south possible that they would still demand to be replaced along with your brake pads. Yous want to bank check if your brake pads wore out symmetrically and if the caliper is yet in good shape. If everything looks adept, then the rotor can be reused with your new brake pads. They won't even need to exist bedded in.

2. The Type Of Replacement Parts You Buy

In that location is another cistron that determines if you should supersede your restriction rotors and pads together, or if it'due south ok to replace them separately. And that is whether you lot get OEM or aftermarket replacement parts.

Toyota pads and rotor

If you go the OEM route with 1 part, then the other part is perfectly reusable. It's considering your OEM part is designed to piece of work with the other part (if it'south OEM, too). For example, OEM replacement brake pads volition piece of work great with the existing OEM rotors in your Toyota. Every bit long every bit the rotors are in good shape, at that place'due south no need to supercede them.

If you buy an aftermarket part, so you'll take to supersede the other part, as well. It'due south because aftermarket brake pads likely won't work well with OEM rotors and vice versa. The brake pad textile may exist as well difficult or too soft for the rotors, and you lot'll end up with worn brake pads and/or worn rotors earlier than expected. If you insist on going the aftermarket road, information technology's just easier to purchase aftermarket restriction pads and rotors that are uniform with each other.

Breaking In New Rotors

If you purchase new rotors, you lot have to break them in. This ensures that the new rotors volition work optimally while braking. Y'all can discover the proper burglary procedure here.

If you go along your old rotors with new brake pads, you don't have to worry about breaking them in.

Friendly Reminder: The Replacements Need To Be Completed Per Axle

Whether yous're replacing both your brake pads and rotors or just replacing 1 part, you still have to replace them on both sides of the axle. For example, even if merely i rotor is worn out and the other one is in adept condition, y'all however accept to replace both rotors.

Doing this ensures braking without pulling to i side, and even clothing.

Got any questions about replacing your brake pads and rotors? Feel costless to contact us.